Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Altiris 060-DSFA680 dans Pass4Test pour se former avant le test Altiris 060-DSFA680.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Altiris 060-DSFA680 peut vous assurer à réussir 100% le test Altiris 060-DSFA680. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Pass4Test est un seul site de provider le guide d'étude Altiris 060-DSFA680 de qualité. Peut-être que vous voyiez aussi les Q&A Altiris 060-DSFA680 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
Code d'Examen: 060-DSFA680
Nom d'Examen: Altiris (Altiris Deployment Solution Foundation 6.8)
Questions et réponses: 100 Q&As
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Altiris 060-DSFA680. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
060-DSFA680 Démo gratuit à télécharger: http://www.pass4test.fr/060-DSFA680.html
NO.1 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A
Altiris 060-DSFA680 060-DSFA680
NO.2 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE
certification Altiris certification 060-DSFA680 060-DSFA680 examen 060-DSFA680 060-DSFA680 examen
NO.3 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B
Altiris examen 060-DSFA680 060-DSFA680
NO.4 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF
certification Altiris 060-DSFA680 examen 060-DSFA680
NO.5 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A
Altiris examen 060-DSFA680 examen 060-DSFA680 060-DSFA680
NO.6 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE
Altiris certification 060-DSFA680 060-DSFA680 certification 060-DSFA680
NO.7 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B
Altiris certification 060-DSFA680 060-DSFA680 certification 060-DSFA680 060-DSFA680 examen
NO.8 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B
Altiris examen certification 060-DSFA680 certification 060-DSFA680
NO.9 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC
certification Altiris 060-DSFA680 060-DSFA680 examen 060-DSFA680 060-DSFA680
NO.10 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A
certification Altiris 060-DSFA680 examen 060-DSFA680 examen 060-DSFA680 060-DSFA680 examen
NO.11 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C
Altiris examen 060-DSFA680 examen 060-DSFA680 060-DSFA680
NO.12 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E
Altiris examen 060-DSFA680 examen 060-DSFA680 060-DSFA680 examen
NO.13 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD
Altiris examen 060-DSFA680 060-DSFA680 examen certification 060-DSFA680 certification 060-DSFA680
NO.14 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C
Altiris certification 060-DSFA680 060-DSFA680 examen
NO.15 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF
certification Altiris 060-DSFA680 certification 060-DSFA680 060-DSFA680 examen 060-DSFA680
NO.16 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C
certification Altiris 060-DSFA680 060-DSFA680
NO.17 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D
Altiris examen 060-DSFA680 060-DSFA680 examen
NO.18 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B
Altiris examen 060-DSFA680 certification 060-DSFA680 060-DSFA680 060-DSFA680
NO.19 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B
certification Altiris certification 060-DSFA680 certification 060-DSFA680 060-DSFA680 examen
NO.20 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C
Altiris certification 060-DSFA680 060-DSFA680 060-DSFA680
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Altiris 060-DSFA680. Votre argent sera tout rendu si vous échouez le test.
没有评论:
发表评论